Home > LED Accessory > RGB Wireless Remote Touch Controller

RGB Wireless Remote Touch Controller

  • IR 24key Controller
  • Aluminum 24-key IR Controller
  • RGB Amplifier
  • RF LED RGB Controller
  • Waterproof LED Power Supply
  • LED Non waterproof Power Supply
  • LED Weather-proof Power Supply
  • 24 Key IR LED Controller
  • 1606 IC RF Dream-color Controller
  • 150W Waterproof LED Power Supply
  • DMX RGB Controller
  • DMX Cable
  • 1903 IC RF Dream-color Controller
  • RGB Amplifier
  • DMX512 Decoder
  • LED RGB Dimmer
  • RGB Wireless Remote Touch Controller
  • LED Single Color Dimmer
  • 2.4G Touch Screen RGBW LED Controller
  • 2.4G 4-zone RGBW LED Controller

Product Abstract:

Newest RGB wireless remote touch controller ,hot sell RGB wireless touch LED Controller,

View Victor He's profile on LinkedIn
Product Description
RGB Wireless Touch LED Controller, LED RGB Touching Controller 
Input Voltage: DC12V,DC24V(optional) 
Connection type: Common anode 
Radio frequency: 433.92MHz 
Receiver sensitivity: -105dbm 
Radio receive way: ASK 
Max STDBY current: 10mA 
Max load: 5A(each circuit) 
Control mode: PWM 
Control way: 3 ways , respectively corresponding R,G,B three colors 
Static power consomption: 30LED/M : ≤5.4W      60LED/M:  ≤10.8W 
Static current: 30LED/M : 450mA      60LED/M:  900mA 
Working temperature:  -20~80 degrees  
Material :Controller: aluminum    remote: ABS+PC 
Life span: 50,000h 
Size:Remote:114×56×22mm        Controller: 65×38×25mm 
Telecontrol distance: 20m 
Function of  Wireless RGB LED Touch Controller:
1, Remote control wirelessly through the RF, the remote controller can control the controllers though parted by the wall and need not aim at it.
2, Remote distance: more than 30 meters in clearing field.
3, How to match code: there will be 8 seconds light on time when remote controller works, during this time the controller will show white light, and press the "fade" key, light turns to green, which indicates code matching is effective. It can achieve the effect of one-to-many and many-to-one. (controllers have been matched codes before leaving factory)
4. Controllers will show white light when on work, after light go out (5s later), press start key, the controller will appear the mode before the last shutdown.
Related Products

Inquiry Information

  • *Subject:

  • *Content:

  • *Telephone Number:

  • *Your E-Mail:

  • *Confirm Text:


Contact Us

  • Contact Person:

  • Tel:

  • Fax:

  • E-mail: